Sometimes you want to have your window open and the blind down. The wind can make the blind rattle against the window frame which can be quite annoying. Magnetic Hold Downs are our solution to this problem!

The Magnetic Hold Downs consist of steel discs which are fitted to the bottom of the blind, and magnets which are fitted to the wall or window frame. The discs and magnets simply attract to each other, holding the bottom of the blind in place.

We supply you with the following parts:

• Two small but very strong neodymium magnets (with screws) which are to be fitted to the wall or window frame at your chosen position.
• Two small steel discs (with screws) which are to be fitted to the rear of the blind at each end of the bottom bar.
• A high quality HSS drill bit for fitting the discs to the bottom bar. 

The Magnetic Hold Downs are designed for use with our roller blinds. However, if you have blinds from another company they may still work. You'll need to check there is a suitable place on the rear of the bottom bar for the discs to be fitted and to check that the bottom bar can take the strain of the strong magnets.

Downloads

Fitting Instructions for Magnetic Hold Down Kit for Roller Blinds